Accessories; Accessories For Onegeardrive Standard; Accessories For Onegeardrive Hygienic - Danfoss VLT OneGearDrive Operating Instructions Manual

Specifications
Description Coding Pin Colour Typical cross-
Brake supply B1
B2
Table 8.4 Mechanical Brake Option Connections
NOTICE
Connect terminal 05 on the VLT
The connection and use of the mechanical brake has been tested and released with VLT
®
VLT Decentral Drive FCD 302. Any other frequency converter may require a different connection. Contact Danfoss Service
for further information.
For information about parameter setting and programming when using VLT
Drive FCD 302, refer to the corresponding operating instructions.

8.7 Accessories

8 8
8.7.1 Accessories for OneGearDrive
Standard
OneGearDrive Standard
Torque arm, stainless steel
Table 8.5 Accessories for OneGearDrive Standard
8.7.2 Accessories for OneGearDrive
Hygienic
OneGearDrive Hygienic
Motor connector without cable
Motor connector with 5 m cable
Motor connector with 10 m cable
Torque arm, stainless steel
Table 8.6 Accessories for OneGearDrive Hygienic
30
Operating Instructions
Maximum cross-
section section
1 Brown AWG 20/ AWG 14/
2
0.75 mm 2.5 mm
2 Black
®
AutomationDrive FC 302 to the 400 V AC supply.
Ordering number
178H5006
Ordering number
178H1613
178H1630
178H1631
178H5006
Danfoss A/S © 06/2014 All rights reserved.
®
VLT AutomationDrive FC 302
400 V AC supply
2
Terminal 04
®
AutomationDrive FC 302 or VLT
® External
VLT
DC supply
Decentral Drive
FCD 302
Terminal 122 +
(MBR+)
Terminal 123 –
(MBR–)
®
AutomationDrive FC 302 and
®
Decentral
MG75C402