Figure 40 - Configuration Of Get/Getp Instruction; Programming - Honeywell 2MLF-HO2A User Manual

7.1 Overview
SoftMaster Program can configure, test and operate High Speed Counter Module in the
following ways:
1. Parameters setting
2. Monitoring/test function execution
3. Read/Write function of internal memory data by the scan program
7.2 Read/Write Internal Memory
This section describes the read/write process of the internal memory (2MLK series) of
High Speed counter module at 2MLT CPU module.
Read Internal Memory
Read Instruction is used for reading the details of High Speed counter module's internal
memory to the PLC CPU The read data can be saved on PLC's CPU memory (except F
area).
1. Operation of GET/GETP Instruction
GET
Always executed with execution condition On
GETP
Executed with execution condition of operation start
2. Configuration of GET/GETP Instruction
Figure 40 – Configuration of GET/GETP Instruction
R200 2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
May 2010

7. Programming

Honeywell
Level
99