Figure 15 - Count Clear - Honeywell 2MLF-HO2A User Manual

ATTENTION
1.
2.
Count Clear
1. When Auxiliary Mode Enabled Signal is ON, present count value is set to 0.
9. Setting method: Set auxiliary setting mode to 1 and Auxiliary Mode Enabled Signal
ON.
10. Count clear function is used for clearing present count whenever Auxiliary Mode
Enabled Signal is switched ON. In other words, while Auxiliary Mode Enabled
Signal is ON, count operation is not continuous.
Count Latch
1. When auxiliary mode enabled signal is ON, present count value is latched.
11. Setting method: Set auxiliary mode setting mode to 2 and set Auxiliary Mode
Enabled Signal ON.
R200 2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
May 2010
To use auxiliary function by program, turn off the external auxiliary mode
and turn on Enable Auxiliary
To use auxiliary function by an external signal, turn on the external
auxiliary mode and turn on External auxiliary input signal (GATE).
Figure 15 – Count Clear
Honeywell
2. Specifications
2.4. Counter Functions
51