4. Operating Procedures and Monitoring
4.3. Parameters Setting
4.3
Parameters Setting
Parameters Setting Screen
To set parameters, perform the following steps.
Step
1
On the Project Window double-click I/O parameters.
The I/O parameters setting window is displayed as shown in Figure 29.
2
Click module area of the applicable slot to select the applicable module.
3
Double-click the corresponding slot to specify the parameters, or click Details
to display the screen where parameters can be set.
68
2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
Action
Figure 29 – I/O Parameter Setting
Honeywell
R200
May 2010