Honeywell 2MLF-HO2A User Manual page 22

2. Specifications
2.1. Performance Specifications
Item
1-phase input
Count
2-phase input
Up/Count
down setting
CW/CCW
1-phase input
Multiplication
2-phase input
function
CW/CCW
Signal
Control input Signal Level
Signal type
Output points
External
output Type
Output type
Input signal
Function to
display
operation Output signal
status
Operation status
Count Enable
Preset function
22 2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
Specifications
2MLF-H02A
Increase or Decrease of count by B-phase input
Increase or Decrease of count by program
Automatic setting by difference in phase
A-phase input: increasing operation
B-phase input: decreasing operation
1/2 multiplication (program setting)
1/2/4 multiplication (program setting)
1-multiplication
Preset instruction input, auxiliary mode instruction input
DC 5V/12V/24V (select terminal) input type
Voltage
2-point/channel (for each channel): terminal output
available
Select single-compared (>, >=, =, =<, <) or section
compared output (included or excluded) (program
setting)
Open collector output (SINK)
A-phase, B-phase, Preset instruction, Auxiliary mode
instruction
OUT1, OUT2
Module Ready, A/B phase pulse input status
To be set through program (count available only in
enable status)
To be set through terminal or program
Honeywell
2MLF-HD2A
R200
May 2010