2. Specifications
2.4. Counter Functions
3.
Count Latch function is used for latching present count whenever Auxiliary Mode
Enabled Signal is switched ON. In other words, while Auxiliary Mode Enabled
Signal is ON, operation is not continuous.
4.
The latched count value is displayed until the next time Auxiliary Mode Enabled
Signal is switched ON.
Sampling Count
When auxiliary mode enabled signal is ON, it counts for a specified time.
•
Setting method: Set auxiliary mode setting mode to 3 and set Time Setting and
•
Auxiliary Mode Enabled signal ON
Sampling Count Function is used to count from 0 for a specified time when
•
Auxiliary Mode Enabled Signal is ON. In other words, while Auxiliary Mode
Enabled Signal is ON, operation is not continuous.
52
2MLF-HO2A, 2MLF-HD2A High Speed Counter Module User's Guide
Figure 16 – Count Latch
Honeywell
R200
May 2010