Mounting Equipment Set - Viega Multiplex Trio F Instructions For Use Manual

3.2.7

Mounting equipment set

Multiplex Trio F drain/overflow functional unit
INFO! We show the mounting here with the Viega plug connec-
tion. Mounting can also be carried out with other connecting
materials. If necessary, observe the manufacturer's instructions.
Push union nut and clamping ring (parts of the connection set) onto
the water-carrying pipe.
Push the narrow end of the screw fitting (part of the connection set)
into the pipe as far as it will go.
Push the free end of the screw fitting into the connection elbow.
Screw in the pipe tight with the union nut onto the connection
elbow.
Place the connection elbow onto the connection of the drain unit
and tighten the union nut by hand.
To avoid damage to the rosette and valve cone, only mount the equip-
ment set after finishing all other work on the building site. Proceed as
follows:
Fit the inlet element into the drain unit.
The shaft on the side of the inlet element must be inserted into the
recess in the drain unit.
Handling
19 from 25