Table of Contents
Advertisement
Ø40
Ø50
3.2.6
Connecting the inlet
Multiplex Trio F drain/overflow functional unit
Push union nut, sliding ring and seal onto the drain elbow.
Screw the union nut on the drain unit.
Maintain an insertion depth of at least 15 mm!
Turn the drain at the joint until the required position has been
reached.
Push wastewater pipe in the drain elbow.
Proceed as follows to connect the water inlet to the drain unit:
Requirements:
A connection set (e. g. the pipe interrupter set) is available.
n
A pipe interrupter is installed in the supply pipeline.
n
Overflow and drain are mounted.
n
Overflow and drain are connected.
n
The connection to the wastewater system has been made.
n
Remove the union nut of the connection elbow from the drain unit
and remove connection elbow.
Handling
18 from 25
Advertisement
Table of Contents
