3.2.6
Mounting equipment set
1
3
2
Multiplex Trio drain/overflow Visign MT9
To avoid damage to the rosette and valve cone, only mount the equip-
ment set after finishing all other work on the building site. Proceed as
follows:
Set the valve cone with the help of the adjusting screw and counter
with the nut.
Remove the red site protection.
Fit the valve cone.
Fit the rotatable rosette loosely (not all the way).
1
To align, turn the rotatable rosette as far as it will go to the left.
ð The valve cone closes itself.
Handling
18 from 22