Sharp COMPET CS-363 Series Instruction Manual page 91

Electronic calculator with elsi
Table of Contents

Advertisement

I
C.
Division function of programming
I
In the CS-363P. it is possible to divide the program into two groups at a desired step. so
that it can memorize completely different two formulas. I n this case. designate program
switch at "PRO" position and while keeping it at such position. store the formula
I
and
then operate the
~
key twice at the end of the formula
I.
Then it becomes the
~
instruction of program
I
and the boundary of No.1 program and No.2 program. Following
the
~
instruction of this
No.
1 program. store the formula II and operate
~
key
once at the end. Then it stores
~
instruction of program
II.
Thus the contents of
programming become as follows
:
PRO·
Program
I
Memorize
formula
I
Program II
Memorize
formula II
Like above. even when two calculation formulas are programmed by using program division
function. keep the program switch always at "PRO" position.
To check or execute No.2 program thus stored. set the program switch at certain position
(CHE ..... DEB .. or "A" position) and operate
~
key.
When
~
key is operated. the step counter proceeds to the two serial END instruction.
Executed "entering" ("PRO" model. "check"
("
CHE" model. "debug" ("DEB" mode) or
"automatic calculation" ("A mode) of No.2 program by next keys operation. When No.2
program calculation is over. in "A" or "DEB" mode. the step counter is reset and when
0
key is operated next time.
No.
1 program is executed. Therefore. touch the
~
key when
executes No.2 program
again.
Please refer to the example of programming in page115"G - 1" using division function.
86

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compet cs-363p

Table of Contents