Setting Up Procedures; Preparing Мvr - Gazer F225 User Manual

Usage/Setting up procedures
You can change the display mode by pressing the MODE button during
standby or recording.
Warning! When image is streamed from 2 cameras simultaneously,
LWDS and FCWS intelligent functions (see. p. 18) are disabled.
• One needs to preconfigure the MVR before using it. By default
(factory settings), all main parameters are set to optimal values.
Nonetheless, one still needs to set the exact time and date. This is
required for further analysis of recorded video files.
• Insert the battery into the battery compartment as shown in the
figure:
Front
camera
Preparing MVR
Back
camera
ENG
Fig. 5
Fig. 6
11