Overview; Description Of Front Panel - VWR INCU-Line Tower Instruction Manual

Overview

The INCU-Line Tower cooled incubator has two chambers - upper and lower. Temperature is individually
controlled.
Access port (Ø 7 mm) for external temperature probe

Description of front panel

The front panel is divided in two parts by a wave line. Display and keys on the left side (above the wave line)
are used to control the upper chamber. Display and keys on the right side (below the wave line) are used to
control the lower chamber.
Power switch turns the power ON and OFF for both chambers. If you use only one chamber, you can turn
the other chamber OFF by simultaneously pressing the corresponding UP and DOWN keys.
POWER - power switch: For turning the incubator ON and OFF. It lights when the incubator is switched ON.
▲ - UP key: For increasing the set-temperature.
▼ - DOWN key: For decreasing the set-temperature.
Display: For displaying the actual temperature (dot blinks when you change the set temperature).
EN 6