Downloading And Installing The App; Logging In To The App - Huawei SUN2000-63KTL-JPH0 User Manual

SUN2000-63KTL-JPH0
User Manual

7.2 Downloading and Installing the App

Search SUN2000 on the following app stores, download the app installation package, and
complete the installation by following the operation guide.


After the app is installed, the SUN2000 symbol will be displayed as below:

7.3 Logging In to the App

Prerequisites



Procedure
Step 1 Start the app. The login screen is displayed. Choose Connection Mode to connect to the
SUN2000.
Issue 04 (2019-06-30)
Huawei App Store (Android)
Google Play (Android)
The DC or AC side of the SUN2000 has been energized.
Connection over a WLAN module or a Bluetooth module:
a. The WLAN module or Bluetooth module is connected to the USB port at the
bottom of the SUN2000.
b. The WLAN or Bluetooth function is enabled.
c. Keep the mobile phone within 5 m from the SUN2000. Otherwise, the
communication between them would be affected.
Connection over a USB cable:
a. The USB data cable is connected from the USB port at the bottom of the SUN2000
to the port on the mobile phone.
b. If the USB data cable is successfully connected, the message Connected to USB
Accessory will pop up on the phone. Otherwise the cable is not connected.
When the WLAN connection is used, the initial name of the WLAN hotspot is Adapter-WLAN

module SN, and the initial password is Changeme. Use the initial password upon first power-on
and change it immediately after login. To ensure account security, change the password periodically
and keep the new password in mind. Not changing the initial password may cause password
disclosure. A password left unchanged for a long period of time may be stolen or cracked. If a
password is lost, devices cannot be accessed. In these cases, the user is liable for any loss caused to
the PV plant.
When the Bluetooth connection is used, the connected Bluetooth device is named after last 8 digits

of the SN barcode+HWAPP.
 After you select Use by default for this USB accessory, a message that asks you to confirm the
USB access will not appear if you log in to the app again without removing the USB data cable.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
58