Huawei SUN2000-63KTL-JPH0 User Manual page 45

SUN2000-63KTL-JPH0
User Manual
No. Cable
3 AC output
power cable
(OT/DT
terminal)
4 DC input power
cable
The AC output power cable can be an aluminum alloy cable with a conductor cross-sectional
area of 35–95 mm
Table 5-3 PE cable specifications
Conductor Cross-Sectional Area S of the AC
Power Cable (mm
2
16 < S ≤ 35
35 < S
The specifications are valid only if the conductors of the PE cable and AC power cable use the same material. If
the materials are different, ensure that the conductor cross-sectional area of the PE cable produces a
conductance equivalent to that of the cable specified in the table.
Issue 04 (2019-06-30)
Type

If you connect a PE cable
to the PE point on the
enclosure, you are
advised to use a
three-core (U, V, and W)
outdoor copper cable and
M10 OT/DT terminals
(U, V, and W).
 If you connect a PE cable
to the PE point in the
maintenance
compartment, you are
advised to use a four-core
(U, V, W, and PE)
outdoor copper cable,
M10 OT/DT terminals
(U, V, and W), and M8
OT/DT terminals (PE).
You do not need to
prepare a PE cable
separately.
PV cable that meets the 1500
V standard
2
.
)
Copyright © Huawei Technologies Co., Ltd.
Conductor
Cross-Sectional
Area Range

U, V, and W:
2
22–95 mm
PE: ≥ 16 mm
2

.
For details, see
Table 5-3.
2
4–6 mm (12–10
AWG)
Conductor Cross-Sectional Area S
Cable (mm )
2
≥ 16
S
P
≥ S/2
S
P
5 Electrical Connections
Outer Source
Diameter
24–57 mm Prepared
by the
customer
4.5–7.8 mm Prepared
by the
customer
of the PE
P
38