Installing The Ac Output Power Cable - Huawei SUN2000-63KTL-JPH0 User Manual

SUN2000-63KTL-JPH0
User Manual




Procedure
Step 1 Open the maintenance compartment door and install the support bar.
Figure 5-4 Opening the maintenance compartment door
Step 2 Remove the cover and hang it on the hook of the door.
Figure 5-5 Removing the cover
----End

5.5 Installing the AC Output Power Cable

Prerequisites

Issue 04 (2019-06-30)
Do not open the host panel cover of the SUN2000.
Before opening the maintenance compartment door, ensure that no electrical connections
are made for the SUN2000 on the AC or DC side.
If you need to open the maintenance compartment door in rainy or snowy days, take
protective measures to prevent rain or snow entering the maintenance compartment. If
unavoidable, do not open the maintenance compartment door.
Do not leave unused screws in the maintenance compartment.
A three-phase AC switch should be installed on the AC side of the SUN2000. To ensure
that the SUN2000 can safely disconnect itself from the power grid when an exception
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
40