Operations Related To The Common User; Setting User Parameters - Huawei SUN2000-63KTL-JPH0 User Manual

SUN2000-63KTL-JPH0
User Manual
----End

7.4 Operations Related to the Common User

7.4.1 Setting User Parameters

Procedure
Step 1 Choose Function Menu > Settings > User Param. to set user parameters.
Figure 7-7 Setting user parameters
Table 7-1 User parameters
Item
Date
Time
Issue 04 (2019-06-30)
On the quick settings screen, you can set basic parameters. After settings, you can modify the parameters
by tapping Settings on the main menu screen.
 Set the correct grid code based on the application area and scenario of the SUN2000.
Set user parameters based on the current date and time.

 Set the baud rate, protocol, and address based on site requirements. The baud rate (bps) can be set to
4800, 9600, or 19200. The protocol can be set to MODBUS RTU, and the address can be set to any
value in the range of 1 to 247.
 When multiple SUN2000s communicate with the SmartLogger over RS485, the Com address for
all the SUN2000s on each RS485 route must be within the address range set on the SmartLogger and
cannot be duplicate. Otherwise the communication would fail. In addition, the Baud rate of all the
SUN2000s on each RS485 route must be consistent with the SmartLogger baud rate.
Description
Set the system date.
Set the system time.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Value Range
[2000-01-01, 2068-12-31]
[00:00:00, 23:59:59]
60