Huawei SUN2000-63KTL-JPH0 User Manual page 66

SUN2000-63KTL-JPH0
User Manual
Step 2 Select a login user and enter the password.

The login password is the same as that for the SUN2000 connected to the app and is used
only when the SUN2000 connects to the app.
 The initial passwords for Common User, Advanced User, and Special User are all
00000a.
 Use the initial password upon first power-on and change it immediately after login. To
ensure account security, change the password periodically and keep the new password in
mind. Not changing the initial password may cause password disclosure. A password left
unchanged for a long period of time may be stolen or cracked. If a password is lost,
devices cannot be accessed. In these cases, the user is liable for any loss caused to the PV
plant.

During the login, if five consecutive invalid password entries are made (the interval
between two consecutive entries is less than 2 minutes), the account will be locked for 10
minutes. The password should consist of six characters.
Step 3 After successful login, the quick settings or main menu screen is displayed.

If you log in to the SUN2000 app after the device connects to the app for the first time or
factory defaults are restored, the quick settings screen will be displayed. If you do not set
SUN2000 basic parameters on the quick settings screen, the screen is still displayed when
you log in to the app next time.

To set SUN2000 basic parameters on the quick settings screen, switch to Advanced User.
If you log in as Common User or Special User, enter the password of the advanced user
to access the Quick Settings screen.
Figure 7-6 Logging in to the app
Issue 04 (2019-06-30) Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
59