SUN2000-63KTL-JPH0
User Manual
8.1 Powering Off the SUN2000
Context
Procedure
Step 1 Run a shutdown command on the SUN2000 app, SmartLogger, or NMS.
For details, see Operations with the SUN2000 App, or the SmartLogger or NMS user manual.
Step 2 Turn off the AC switch between the SUN2000 and the power grid.
Step 3 Set all DC switches to OFF.
----End
8.2 Routine Maintenance
To ensure that the SUN2000 can operate properly for a long term, you are advised to perform
routine maintenance on it as described in this chapter.
Issue 04 (2019-06-30)
If two SUN2000s share the same AC switch on the AC side, power off the two SUN2000s.
After the SUN2000 powers off, the remaining electricity and heat may still cause electric
shocks and body burns. Therefore, put on protective gloves and begin servicing the
SUN2000 15 minutes after the power-off.
Copyright © Huawei Technologies Co., Ltd.
8
Maintenance
8 Maintenance
102