SUN2000-63KTL-JPH0
User Manual
Figure 7-22 Power adjustment parameters
Table 7-11 Power adjustment parameters
Parameter
Remote power schedule
Schedule instruction
valid duration (s)
Maximum apparent
power (kVA)
Maximum active power
(kW)
Issue 04 (2019-06-30)
Description
If this parameter is set to Enable, the
SUN2000 responds to the remote power
schedule command. If it is set to Disable,
the SUN2000 does not respond to the
command.
Adjusts the duration within which the
scheduling instruction is valid.
Specifies the output upper threshold for the
maximum apparent power to adapt to the
capacity requirements for standard and
customized SUN2000s.
Specifies the output upper threshold for the
maximum active power to adapt to various
market requirements.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Value Range (Smax_limit:
upper limit of the maximum
apparent power, Pmax_limit:
upper limit of the maximum
active power, Fn: rated
frequency)
Disable
Enable
[0, 86400]
[Maximum active power,
Smax_limit]
[0.1, Pmax_limit]
83