Downloading And Installing The App - Huawei SUN2000 Series User Manual

SUN2000-(100KTL, 110KTL, 115KTL)-M2
User Manual
Figure 7-1 Connection over a WLAN module or a Bluetooth module
(A) SUN2000
Figure 7-2 Connection over a USB data cable
(A) SUN2000
Disclaimer
● The configurable parameters of the SUN2000 vary with the device model and
● If you change the grid code, some parameters may be restored to factory
● Delivering a reset, factory reset, shutdown, or upgrade command to the solar
● Only professionals are allowed to set the grid parameters, protection
● The parameter names, value ranges, and default values are subject to change.

7.1.2 Downloading and Installing the App

●
Issue 02 (2022-06-30)
NO TICE
grid code.
defaults. After the grid code is changed, check whether the previously set
parameters are affected.
inverters may cause power grid connection failure, which affects the energy
yield.
parameters, feature parameters, and power adjustment parameters of the solar
inverters. If the grid parameters, protection parameters, and feature parameters
are incorrectly set, the solar inverters may not connect to the power grid. If the
power adjustment parameters are incorrectly set, the solar inverters may not
connect to the power grid as required. In these cases, the energy yield will be
affected.
FusionSolar app: Scan the QR code and download the latest installation
package.
Copyright © Huawei Technologies Co., Ltd.
(B) WLAN module or
Bluetooth module
(B) USB data cable
7 Man-Machine Interactions
(C) Mobile phone
(C) Mobile phone
64