Installing The System Cover - Dell E28S Series Owner's Manual

Installing and removing system components
After you finish
1. Install the system cover.

Installing the system cover

Before you begin
1. Follow the safety guidelines listed in the Safety instructions section.
2. Ensure that all internal cables are connected and placed out of the way and no tools or extra
Procedure
1. Align the slots on the system cover with the tabs on the chassis.
2. Push the system cover latch down to move the system cover into the closed position.
3. Rotate the latch release lock clockwise to the locked position.
After you finish
1. If removed, install the front bezel.
2. Reconnect the peripherals and connect the system to the electrical outlet.
3. Turn on the system, including any attached peripherals.
Dell PowerEdge R430 Owner's Manual
88
parts are left inside the system.
The system cover slides forward and the slots on the system cover engage with the tabs on
the chassis. The system cover latch locks into place when the system cover is completely
engaged with the tabs on the chassis.
Figure 20 Installing the system cover
a. latch release lock
b. latch
c. system cover