Removing The Integrated Storage Controller Card - Dell E28S Series Owner's Manual

Installing and removing system components

Removing the integrated storage controller card

Before you begin
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the cooling shroud.
4. Keep the Phillips #2 screwdriver ready.
Procedure
1. Loosen the screws that secure the integrated storage controller cable to the integrated
2. Lift the integrated storage controller cable away from the integrated storage controller.
3. Lift one end of the card and angle it to disengage the card from the integrated storage
4. Lift the card out of the system.
Dell PowerEdge R430 Owner's Manual
142
CAUTION Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
storage controller card connector on the system board.
controller card holder on the system board.
Figure 62 Removing the integrated storage controller card
a. integrated storage controller cable