Installing A Hard Drive Into A Hard Drive Carrier - Dell E28S Series Owner's Manual

Installing a hard drive into a hard drive carrier

Before you begin
Procedure
1. Insert the hard drive into the hard drive carrier with the connector end of the hard drive
2. Align the screw holes on the hard drive with the screws holes on the hard drive carrier.
3. Attach the screws to secure the hard drive to the hard drive carrier.
After you finish
Install the hot swappable hard drive carrier.
Figure 40 Removing a hard drive into a hard drive carrier (continued)
a. screw (4)
b. hard drive
c. hard drive carrier
CAUTION Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
toward the back of the carrier.
When aligned correctly, the back of the hard drive is flush with the back of the hard drive
carrier.
Figure 41 Installing a hard drive into a hard drive carrier
a. screw (4)
b. hard drive
c. hard drive carrier
Installing and removing system components
Dell PowerEdge R430 Owner's Manual
117