Internal Usb Memory Key (Optional); Replacing The Optional Internal Usb Memory Key - Dell E28S Series Owner's Manual

After you finish
1. Install the cooling shroud.
2. Follow the procedure listed in the After working inside your system section.

Internal USB memory key (optional)

An optional USB memory key installed inside your system can be used as a boot device, security
key, or mass storage device.
To boot from the USB memory key, configure the USB memory key with a boot image and then
specify the USB memory key in the boot sequence in System Setup.
The internal USB port must be enabled in Internal USB Port option in the Integrated Devices
screen of System Setup.
The internal USB port is located on the system board.

Replacing the optional internal USB memory key

Before you begin
Figure 47 Installing a cooling fan
a. cooling fan
b. power cable connector
c. cooling fan bracket
Note: To locate the internal USB port (INT_USB) on the system board, see the System board
connectors section.
CAUTION Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
Installing and removing system components
Dell PowerEdge R430 Owner's Manual
125