Setting Up Your System; Idrac Configuration; Options To Set Up Idrac Ip Address - Dell E28S Series Owner's Manual

Table of Contents

Advertisement

Initial system setup and configuration

Setting up your system

Complete the following steps to set up your system:
Procedure
1. Unpack the system.
2. Install the system into the rack. For more information about installing the system into the
3. Connect the peripherals to the system.
4. Connect the system to its electrical outlet.
5. Turn the system on by pressing the power button or by using iDRAC.
6. Turn on the attached peripherals.

iDRAC configuration

The Integrated Dell Remote Access Controller (iDRAC) is designed to make system administrators
more productive and improve the overall availability of Dell systems. iDRAC alerts administrators to
system issues, helps them perform remote system management, and reduces the need for physical
access to the system.

Options to set up iDRAC IP address

You must configure the initial network settings based on your network infrastructure to enable the
communication to and from iDRAC. You can set up the IP address by using one of the following
interfaces:
Interfaces
Document/Section
iDRAC Settings utility
Dell Deployment Toolkit
Dell Lifecycle Controller
Chassis or Server LCD panel
You must use the default iDRAC IP address 192.168.0.120 to configure the initial network settings,
including setting up DHCP or a static IP for iDRAC.
Log in to iDRAC
You can log in to iDRAC as:
Dell PowerEdge R430 Owner's Manual
52
rack, see your system
Dell Integrated Dell Remote Access Controller User's Guide at Dell.com/idracmanuals
See
See
Dell Deployment Toolkit User's Guide at Dell.com/openmanagemanuals
Dell Lifecycle Controller User's Guide at Dell.com/idracmanuals
See
See the LCD panel section
Note:
To access iDRAC, ensure that you install the iDRAC port card or connect the network
cable to the Ethernet connector 1 on the system board.
Note:
Ensure that you change the default user name and password after setting up the iDRAC
IP address.
Rack Installation Placemat at Dell.com/poweredgemanuals.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r430

Table of Contents