Processible Working Materials; Misuse - WAGNER Zip 52 Finishing Operating Manual

VERSION 11/2018
2.4

PROCESSIBLE WORKING MATERIALS

Fluid materials like paints and lacquers.
Application
Water-dilutable products
Solvent-based lacquers and paints
Two-component coating products
Emulsions
UV lacquers
Primers
Epoxy and polyurethane lacquers, phenolic
lacquers
Wax-based underside protection
Shear-sensitive lacquers
recommended
NOTICE
Abrasive working materials and pigments!
Greater wear of product-wetted parts.
Use the application-oriented model (flow rate/cycle, product, valves, etc.) as
indicated in Chapter 5.6.
Check if the fluids and solvents used are compatible with the pump construction
materials as indicated in Chapter 5.6.1.
Wear caused by abrasive working materials is not covered by the warranty.
Typical applications
Application
Furniture industry
Kitchen manufacturers
Joinery
Window factories
Steel-processing industry
Construction of vehicles
Shipbuilding
recommended
2.5

MISUSE

Misuse can lead to physical injury and/or property damage!
Special attention must be paid that:
no dry coating products, e.g., powder are processed.
no food, medicine or cosmetics are processed.
It is important to note that the device's materials are not food-safe.
ORDER NUMBER DOC 2332848
Finishing Finishing SSt Eco-Finishing Finishing POM
limited suitability
Finishing
limited suitability
Zip 52 Finishing
not suitable
Finishing Eco-
SSt Finishing
not suitable
Finishing
POM
9