Identification; Explosion Protection Identification; Identification "X - WAGNER Zip 52 Finishing Operating Manual

VERSION 11/2018
3

IDENTIFICATION

3.1

EXPLOSION PROTECTION IDENTIFICATION

Device types: metallic versions in aluminum, stainless steel and in conductive acetal.
Pneumatic double diaphragm pumps with Order no.
U760.00 (aluminum)
U773.00 (POM - acetal)
As defined in the Directive 2014/34/EU (ATEX), the device is suitable for use in potentially
explosive areas.
Manufacturer: Wagner S.p.A.
I - 23868 Valmadrera (LC)
CE European Communities
Ex Symbol for explosion protection
II Device class II
2 Category 2 (zone 1)
G Ex-atmosphere gas
Ex Ignition protection
h Ignition protection for non-electrical devices
IIB Explosion group
T4 Maximum surface temperature < 135 °C; 275 °F (with drying protection
active)
Gb Zone 1 high safety level
X Special notes (see Chapter 3.2)
3.2

IDENTIFICATION "X"

The maximum surface temperature corresponds to the permissible product temperature.
This and the permissible ambient temperature can be found in Chapter
Data).
Safe Handling of WAGNER Spray Devices
Mechanical sparks can form if the device comes into contact with metal.
In an explosive atmosphere:
knocking or pushing metal against metal is to be avoided;
do not drop the device.
Maximum surface temperature
The maximum surface temperature of the pump depends on the operating
conditions (heated product) and not on the device (frictional heat).
Ignition temperature of the coating product
Ensure that the ignition temperature of the coating product is above the maximum
surface temperature.
Ambient temperature
The permissible ambient temperature range is: 10 °C to 40 °C; 50 °F to 104 °F.
Surface spraying, electrostatics
Do not spray device parts using electrostatic equipment.
ORDER NUMBER DOC 2332848
U765.00 (stainless steel)
--
Zip 52 Finishing
U731.00 (aluminum)
--
5.6.2 (Technical
10