General Information Screens - Power Electronics V5 Series Getting Started Manual

10. GENERAL INFORMATION SCREENS

The bottom line displays the General Information and parameter screens (G1 to G16).
The general information screens show information related to the motor and V5 status:
PHASE CURRENT
Screen
Description
Range
Units
Attribute
Function
SUPPLY VOLTAGE
Screen
Description
Range
Units
Attribute
Function
SUPPLY FREQUENCY, MOTOR COS PHI
Screen
Description
Range
Units
Attribute
Function
NOTE:
ACTIVE POWER, MOTOR TORQUE
Screen
Description
Range
Units
Attribute
Function
NOTE:
RELAY STATUS
Screen
Description
Range
Units
Attribute
Function
DIGITAL INPUTS
Screen
Description
Range
Units
Attribute
Function
POWER ELECTRONICS V5 Operation Instructions
30
800A 800A 800A
L1, L2, L3 phase current.
0 to 9999A
Amperes
Read only.
Shows the instantaneous current of the three incoming phases.
380V 380V 380V
L1-L2, L2-L3, L1-L3 Line voltage.
0 to 999
Volts
Read only.
Shows the line-to-line input voltage.
Fr=50Hz Cos=0.85
Supply frequency and actual motor phi cosine.
0 to 99Hz, 0 to 1
Hertz. Cos Phi
Read only.
Shows the supply frequency and cos phi of the motor.
This screen is only visible while the motor is running.
P=450kW Pr=99%
Active power, motor torque.
1 to 999kW,0 to 999%
kilowatts, percentage of nominal motor torque.
Read only.
Shows the instantaneous kilowatts and percentage of nominal motor torque.
This screen is only visible while the motor is running.
RELAYS 1 2 3 0 0 0
Status of relay 1, 2, 3.
0 de-energised, X energised.
none
Read only.
Shows the relay status if the relays are energised (X) or de-energised (0).
DIG INPUT= 0 0 0 0 0 F
Digital inputs 1, 2, 3, 4, 5 & PTC status.
0 =open, X =closed. K = PTC ok, F = fault in PTC wiring.
None.
Read only.
Shows status of the digital inputs and the status of the PTC input.
Reference table to digital inputs & motor PTC :
1. Digital Input 1 (Terminal T11)
2. Digital Input 2 (Terminal T12)
3. Digital Input 3 (Terminal T13)
4. Digital Input 4 (Terminal T14)
5. Digital Input 5 (Terminal T15)
6. Input to motor PTC (Terminal T16 and T17)
0 open, X closed
0 open, X closed
0 open, X closed
0 open, X closed
0 open, X closed
k = o.k., F = fault
V5IM01BI