Gear Shift Control Lever Seat - Suzuki Samurai 1986 Service Manual

Gear Shift Control Lever Seat

Make sure to fit control lever seat @I into
gear shift lever case so that locating bolt @
goes in the groove of control lever seat. And
fit wave washer @J with its projection surface
directed upward.
Fig. 12-15
Tightening Torque (h Greasing point
To be tightened to:
4 - 7
bolt
Reverse select 25 - 35
pin screw
bolt
Lever locating
bolt 1 4 - 2 0
Lever case
bolt 1 8 - 2 8
4 - 7
select pin bolt
Between gear shift lever boot No. 1 and lever
case cover
: Between gear shift lever and lever seat
Between gear shift lever and lever case
Gear shift lever locating bolt
12-6
kg-m lb-ft
0.4 -0.7
2.5 - 3.5 18.5 - 25.0
1 . 4 - 2 . 0
1 . 8 - 2 . 8 1 3 . 5 - 2 0 . 0
0.4 - 0.7 3.0 - 5.0
SUZUKI SUPER GREASE A(99000-25010).
from case, be sure to apply locking agent
(THREAD LOCK CEMENT SUPER "1333B"
99000-32020) to bolt thread for reinstalla-
tion.
Fig. 12-16