Suzuki Samurai 1986 Service Manual page 411

2) Install shoe hold down springs by pushing
them down in place and turning hold down
pins.
Fig. 19-51
Brake Drum
1) Install parking brake shoe lever stopper plate,
referring to the following figure for its instal-
lation direction.
Upper side
Fig. 19-52
shoe lever side
lever stopper plate
2. Parking brake shoe
lever
3. Brake back plate
1. Parking brake shoe lever stopper
Plate
2) Connect brake cable joint to parking brake
shoe lever by using joint pin.
Insert joint pin down from the top and
install clip into joint pin hole securely.
NOTE:
Check to ensure that clip is in good condition
before installing it. If deformed or broken,
replace.
Fig. 19-52-1
3) Install parking brake shoe lever return spring.
Fig. 19-53
1. Joint pin
2. Cable joint
3. Parking brake shoe lever
4. Clip
19-25