Suzuki Samurai 1986 Service Manual page 68

6) Take down alternator and water pump
pulley.
Fig. 3-4-6
Fig. 3-4-7
7) Remove crankshaft pulley by removing 4
pulley bolts, with special tool (A) hitched to
flywheel so that crankshaft will not turn.
The crank timing belt pulley bolt at the
center needs not to be loosened.
Fig. 3-4-8
3-10
1. Crankshaft pulley
2. Crankshaft pulley bolt
3. Crank timing belt pulley bolt
Fig. 3-4,9 (A) Flywheel holder (Special tool
09924-17810)
8) Remove outside cover on timing belt.
Fig. 3-4- 10
9) Loosen tensioner bolt and stud, and remove
belt from crank timing belt pulley and cam-
shaft pulley after pushing up tensioner
plate fully by finger as shown in Figure
3-4-l 1.
Fig. 3-4- 11
Timing belt
2. Tensioner plate
3. Tensioner bolt
4. Tensioner stud