Henny Penny HHC-980 Technical Manual page 16

2-2. TECH MODE (Continued)
2-2
T-1: Software
This section shows "PN/ID/SRL"
Press . Henny Penny eprom part number is displayed.
Press . Customer ID (i.e. Pizza Hut) is displayed
Press . Software revision is displayed.
T-2: Cabinet Version
Shows the model number, e.i. HHC-983
T3: Push Button Test
Press any button on the control and a digital display feedback
confirms the button is working
T4: All On Display Test
Press any of the product buttons and every LED on the 16 digit
display lights
T5: Segments Test
Repeatedly pressing any product button lights one segments in
every one of the 16 digit displays
T6: Digits Test
Repeatedly pressing any product button lights all segments in
one of the 16 digital displays (scrolls though all 16)
T7: Decimal Point Test
Repeatedly pressing any product button lights a decimal point
(DP) in one of the 16 digital displays (scrolls though all 16)
T8: LED Test
Repeatedly pressing any product button lights individual
LEDs (scrolls though all LEDs)
T9: Air Temperature - Circuit Calibration
Factory use only
Model HHC-980/983
904