Henny Penny HHC-980 Technical Manual page 20

2-3. STATS MODE (Continued)
2-6
ST-1: Power Live Hours
Shows the number of hours the unit has been plugged in
ST-2: Power On Hours
Shows the number of hours the control has been on
ST-3: Power Ups Count
Shows the number of times the control has been turned on
ST-4: Errors Count
Shows the total number of all errors (displayed on control) that
have occurred with the unit
ST-5: Air Heat On Hours
Shows the number of hours the air heaters have been on
ST-6: Water Heater On Hours
Shows the number of hours the water heater has been on
ST-7: Circulation Fan On Hours
This section shows the number of hours the cooling fan has
been on.
ST-8: Water Solenoid On Hours
Shows the number of hours the solenoid has been on
ST-9: Solenoid Cycle Count
Shows the number of times the solenoid has been turned on
ST-10: Longest Solenoid 'On' time. Maximum 5 minutes.
Shows the longest the solenoid has been on at any one time, to
a maximum of 5 minutes
ST-11: Highest Air Temperature
Shows highest air temperature sensed by the temperature probe
ST-12: Highest Water Heater Temperature
Shows the highest water heater temperature, sensed by the
water heater temperature sensor
Model HHC-980/983
904