Mandik FDMC General Information Manual page 12

Fig. 11 The distance between the fire damper and the
construction
min. 200
5.2. The control mechanism has to be protected (covered) against damage and pollution during
installation process. All fire dampers has to be closed during installation process. The damper
body should not be deformed in the course of bricking in. Once the damper is built in, its blade
should not grind on the damper body during opening or closing.
5.3. Installation opening dimensions (see Fig. 13-14)
Fig. 13 Installation opening
The control mechanism has to be protected (covered) against damage and pollution during
5.4.
installation process.
All fire dampers has to be closed during installation process. The damper body should not be
deformed in the course of bricking in. Once the damper is built in, its blade should not grind on
the damper body during opening or closing.
min. 75
11
Fig. 12 Built-in edge - design with outer mechanical
control or actuating mechanism
BUILT-IN EDGE
BUIL-IN EDGE
Fig. 14 Installation opening
TPM 083/12
BUILT-IN EDGE