Sensor Setup Menu - Hach NO3D sc User Manual

Operation

4.5 Sensor setup menu

SELECT SENSOR (if there is more than one sensor)
CALIBRATE
CAL.CONFIG.
-or-
CAL.CONFIG.>SENSOR CODE
DATE
SENSOR CODE
-or-
CAL.CONFIG.>MATX1
DATE
CONC MEAS 1
SET NO3–N CONC
-or-
CAL.CONFIG.>MATX1 CL-
DATE
CONC MEAS 1
SET CL- CONC
SET NO3–N CONC
-or-
CAL.CONFIG.>MATX2
CONC MEAS 1
DATE
SET NO3–N CONC
CONC MEAS 2
DATE
SET NO3–N CONC
-or-
CAL.CONFIG.>MATX2 CL-
CONC MEAS 1
DATE
SET CL- CONC
SET NO3–N CONC
CONC MEAS 2
DATE
SET CL- CONC
SET NO3–N CONC
20
Note: If once a calibration method is chosen the entries will be displayed in the first
submenu of the calibrate menu.
Select SENSOR CODE, MATX1, MATX1 CL-, MATX2, MATX2 CL-, VALUE CORR,
PREVIOUS CAL or FACTORY CAL
Displays the date of sensor cartridge start up
Display and entry of the sensor code
1 point matrix correction (see
Displays the date of the current correction
Saving the currently measured measurement
Entry and display of the NO
1 point matrix correction with chloride (see
Displays the date of the current correction
Saving the currently measured measurement
-
Entry and display of the Cl
Entry and display of the NO
2 point matrix correction (see
Saving the currently measured measurement
Displays the date of the current correction
Entry and display of the NO
Saving the second measured measurement
Displays the date of the current correction
Entry and display of the NO
2 point matrix correction with chloride (see
Note: Carry out the matrix correction only as a standard addition in the sample matrix.
Saving the currently measured measurement
Displays the date of the current correction
-
Entry and display of the Cl
Entry and display of the NO
Saving the second measured measurement
Displays the date of the current correction
-
Entry and display of the Cl
Entry and display of the NO
section 4.6.3.1 on page 24)
–N reference value (lab value)
3
section 4.6.3.2 on page
reference value (lab value)
–N reference value (lab value)
3
section 4.6.3.3 on page 25)
–N reference value (lab value)
3
–N reference value (lab value)
3
section 4.6.3.4 on page
reference value (lab value)
–N reference value (lab value)
3
reference value (lab value)
–N reference value (lab value)
3
24)
26)