Interface - H3C S9500 Series Command Manual

Command Manual – Ethernet Interface
H3C S9500 Series Routing Switches
port group.
By default, a manual port group contains no Ethernet interface.
Examples
# Add interfaces Ethernet1/1/1 and Ethernet1/1/5 to the manual port group named
group1.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1] group-member Ethernet 1/1/1 to Ethernet
1/1/5

1.1.19 interface

Syntax
interface interface-type interface-number
View
System view
Default Level
2: System level
Parameters
interface-type interface-number: Interface type and interface number.
Note:
Interface is numbered using slot number, daughter card number, and interface
number. For example, the interface number of Ethernet 1/1/1 is 1/1/1.
For ease of user input, interface type can be abbreviated so long as it does not
cause any confusion, for example, interface Ethernet 1/1/1 can be abbreviated as
e1/1/1.
Description
Use the interface command to enter interface view.
Examples
# Enter Ethernet1/1/1 interface view.
<Sysname> system-view
Chapter 1 Ethernet Interface Configuration Commands
1-26