Display Port - H3C S9500 Series Command Manual

Command Manual – Ethernet Interface
H3C S9500 Series Routing Switches

1.1.8 display port

Syntax
display port { hybrid | trunk }
View
Any view
Default Level
1: Monitor level
Parameters
hybrid: Displays the existing Hybrid ports.
trunk: Displays the existing Trunk ports.
Description
Use the display port command to display the information about the existing ports that
are of a specified type, including port name, default VLAN ID, and the VLAN ID of
VLANs that the ports can pass through.
Examples
# Display the existing hybrid ports.
<Sysname> display port hybrid
Interface
GE4/2/2
# Display the existing trunk ports.
<Sysname> display port trunk
Interface
GE4/3/2
Table 1-7 Description on the fields of the display port command.
Interface
PVID
VLAN passing
Chapter 1 Ethernet Interface Configuration Commands
PVID VLAN passing
100 Tagged:
Untagged:1, 10, 15, 18, 20-30, 44, 55, 67, 100,
PVID VLAN passing
2 1-4, 6-100, 145, 177, 189-200, 244, 289, 400,
555, 600-611, 1000, 2006-2008
Field
1-13
1000, 1002, 1500, 1600-1611, 2000,
2555-2558, 3000, 4000
150-160, 200, 255, 286, 300-302
Description
Interface name
Default VLAN ID of a port
ID of the VLANs permitted by the port