Display Counters - H3C S9500 Series Command Manual

Command Manual – Ethernet Interface
H3C S9500 Series Routing Switches
Interface
GE4/2/1
GE4/2/2
GE4/2/4
GE4/3/1
GE4/3/2
GE4/3/3
GE4/3/4
Table 1-2 Description on the fields of the display brief interface command.
The brief information of interface(s)
under route mode:
Interface
Link
Protocol-link
Protocol type
Main IP
The brief information of interface(s)
under bridge mode:
Speed
Duplex
PVID
Table 1-3 Acronyms for different types of Interface
Ethernet
GigabitEthernet
Ten-GigabitEthernet

1.1.5 display counters

Syntax
display counters { inbound | outbound } interface [ interface-type ]
Link
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
DOWN
Field
Interface name
Chapter 1 Ethernet Interface Configuration Commands
Speed Duplex
auto auto
auto auto
auto auto
auto auto
auto auto
auto auto
auto auto
Brief information of interface(s) in route
mode
Abbreviated interface name
Interface physical link state, which can
be up or down
Interface protocol link state, which can
be up or down
Interface protocol type
Main IP
Brief information of interface(s) in bridge
mode
Interface rate, in bps
Duplex mode, which can be half (half
duplex), full (full duplex), or auto
(auto-negotiation).
Default VLAN ID
Eth
GE
XGE
1-6
Link-type PVID
access 1000
access 1
access 1
access 1
access 1
access 1
access 1
Description
Acronyms