Group-Member - H3C S9500 Series Command Manual

Command Manual – Ethernet Interface
H3C S9500 Series Routing Switches
Default Level
2: System level
Parameters
interval: Interval for generating interface statistics, in the range of 5 to 300 (in seconds)
in steps of 5.
Description
Use the flow-interval command to set the interval for generating interface statistics.
Use the undo flow-interval command to restore the default.
By default, the interval for generating interface statistics is 300 seconds.
Examples
# Set the time interval for generating interface statistics to 100 seconds for interface
Ethernet1/1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1/1
[Sysname-Ethernet1/1/1] flow-interval 100

1.1.18 group-member

Syntax
group-member interface-list
undo group-member interface-list
View
Manual port group view
Default Level
2: System level
Parameters
interface-list: Ethernet interface list, in the format of {interface-type interface-number
[ to interface-type interface-number ] } &<1-10>, where interface-type interface-number
is Ethernet interface type and number, and &<1-10> means that you can specify up to
10 interfaces/interface ranges for this argument.
Description
Use the group-member command to add Ethernet interfaces to a manual port group.
Use the undo group-member command to remove Ethernet interfaces from a manual
Chapter 1 Ethernet Interface Configuration Commands
1-25