Important Caution; Features; Specification; Receiver// Us-901D Us-9001D - JTS US-9001D Instruction Manual

1. Important Caution

•
Always make all connections before plugging the unit into an AC power outlet.
•
Do not leave the devices in a place neither with high temperature nor high humidity.
•
Always do not handle the power cord with wet hands !
•
Keep the devices away from fire and heat sources.

2. Features

•
Operated in UHF band where there is less RF interference than the VHF band.
•
Due to the PLL synthesized technology, the system can offer up to 193 selectable frequencies for
choosing simultaneously.
•
The true diversity reception with 2 independent RF receivers ensure the stable transmission and
reception.
•
Adjustable Pilot tone squelch control can effectively reduce the noise.
•
Equipped with S.A. W . filter benefits the interference-resistant.
•
Tuned antennas can benefit the stable RF reception.
•
Built-in Noise Squelch circuity & Mute function are available to restrain the interference for
signals.
•
Compact half-rack receiver design is considerable for the space saving.
•
Rugged metal housing can pass through the difficult environment.
•
Equipped with balanced XLR and unbalanced output allow great convenience.
•
Anti-interference design is available to work with every computer device.
1
WIRELESS MICROPHONE SYSTEM

3. Specification

3-1 Receiver // US-901D US-9001D
Frequency Preparation...... PLL Synthesized Control
Carrier Frequency Range 502~960 MHz
S/N Ratio................................... > 105dB
T.H.D.................................. <0.6%@1KHz
Display.............................. LCD
Display Contents................... Frequency, Antenna A/B, Mute Display, RF/AF Level Meter,
Battery Fuel Gauge
Controls............................ Power On/Off, Frequency Up/Down, Frequency
Scan, Audio Level, Lock-on
Audio Output Level............ -12dB
AF Output Impedance...... 600Ω
Squelch............................. Pilot Tone & Noise Mute
Operation Voltage................. 12-18 VDC, 200 mA
Output Connector................ 1 XLR Balanced Socket
1 Ø6.3mm Unbalanced phone jack
Dimension(m/m)............... US-901D: 212mm (W)* 40mm (H)* 125mm (D)
US-9001D: 212mm (W)* 40mm (H)* 137mm (D)
2