Working With The Program Levels; Accessing The Relevant Program Level; Presettings Level; Service-Menu Level P1 - Fronius TransTig 1600 Operating Instructions And Spare Parts List

Working with the program levels

Accessing the -
relevant program -
level -
-
Presettings Use button (4) to select the parameters, and the torch trigger to change their values.
level --- Only the parameters for the operating mode that is set (TIG/ Electrode) are shown.
Parameters for TIG operating mode DC
GAS
G-L
G-H
UPS
SCU
I3
HFt
SCU
StS
SFS
ELd
PRO
FAC
Parameters for electrode operating mode
Hti
HCU
dYn
PRO
FAC
Parameters of the pre-set Fronius-program (FAC)
GAS
G-L
G-H
UPS
SCU
I3
HFt
Service-menu Service-menu with various test programs
Level P1
You can find a detailed description of the service menu in the Operating Instructions
"Set-up functions / Error indications", which are available as on option (42,0410,0494).
With button (4) pressed, switch on the machine
--- appears
Press and hold down the torch trigger until
1. P1 appears
2. P1 appears
3. --- appears again
Release button (4)
Gas pre-flow 0-20s.
Gas post-flow at I
min
Gas post-flow at I
max
Up-slope 0,1-7s.
Start Current - Start arc 0-100%
Reduced current, 0-100% of I
Time of HF-period (from 0,01-0,4s)
Starting current - As absolute value of max. main current (160A/170A)
As relative value of pre-set main current
Special 2-step mode ON/OFF
Special-4-step mode OFF/1/2/3/4/5
Diameter of tungsten electrode (from 0-3,2mm)
Program - For storing the parameters, once these have been set, by pressing the
torch trigger
Factory - For activating the parameters pre-set by Fronius, by pressing the torch
trigger
Hotstart time
Hotstart current
Arcforce dynamic
Program - For storing the parameters, once these have been set, by pressing the
torch trigger
Factory - For activating the parameters pre-set by Fronius, by pressing the torch
trigger.
0,4s
5,0s
15,0
1,0s
29%
50%
0,01s
-> "Presettings" level
-> Service-menu level
-> Codelock level
-> Presettings level
2,0-26s.
2,0-26s.
H
0,2-2s
0-100%
0-100A
SCU
StS
SFS
ELd
Hti
HCU
dyn
16
rEL
OFF
OFF
2,4mm
0,5s
50%
30A