Fitting The Clamp System; Fitting The Clamp System With Extension - Fronius MHP 700 S R/W/PAP/FSC Operating Instructions Manual

Fitting the clamp
1
system
Fitting the clamp
1
system with ex-
tension
Mount the index disc 45° from the scope of supply of the clamp extension
NOTE!
CB (for CrashBox) is stamped on one side of the clamp extension.
▶
2
Fit the clamp extension to the index disc that
has already been fitted in such a way that the
stamped 'CB' on the clamp extension faces the
index disc!
This side must be fitted to the index disc that has already been fitted.
CB
2
3
42 Nm
30.98 lb-ft
42 Nm
30.98 lb-ft
42 Nm
30.98 lb-ft
53