Control Panel; Tt 1700 Control Panel; Description Of Functions - Fronius TransTig 1600 Operating Instructions And Spare Parts List

Control panel

TT 1700
control panel
11
10
9
13
15
Fig. 2
Description of
Item Function
functions
(1)
(2)
(3)
(4)
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described here until you have read and
completely understood all of the following documents:
- these Operating Instructions
- all "Operating Instructions" for the system components, especially the
"Safety rules"
2
Front panel Transtig 1700
Mains ON / OFF switch (see Fig.5)
Digital-Ammeter
Indicator of the main current
Command value -> desired welding current
Actual value -> actual welding current
Digital-Voltmeter
Indicator of the welding voltage
Function button
a) 2-step operation -> TIG welding with HF-ignition
b) 4-step operation -> TIG welding with HF-ignition
+ c) 2-step operation -> TIG welding with contact ignition
+ d) 4-step operation -> TIG welding with contact ignition
- Arc force control and hot-start devices are out of action
- When the TR 50mc, TR 51mc and TR 52mc remote-control units are used,
the system switches over to the operating mode in question automatically
- LED indicators (7) or (8) resp. (6) + (7) or (6) + (8) lights up
14 3
16
3
8
7
6
5
12
4