Table of Contents
Advertisement
A
PPENDIX
U
PGRADE
E
MBEDTEK
Medtronic CathLab VR™ Upgrade
instructions
Proper operation of the simulator requires correct configuration. Follow this sequence of the steps to
upgrade the Medtronic CathLab VR system software from a Windows® XP computer to a Windows®
7 computer.
To connect a Windows 7 computer (that has upgraded Medtronic CathLab VR software) with an
existing CathLab VR device:
1. Turn the computer ON
2. Connect the computer to the CathLab VR device with a USB cable
3. Connect the CathLab VR device to a power outlet
4. Turn the CathLab VR device ON
5. Start Calibration of CathLab VR HW:
a.From the computer, select Start > All Programs > CAE Healthcare > Medtronic CRDM >
Calibrate CathLab VR HW
The calibrate file
PN: 905K400652
Upgrade Instructions & Embedtek Specs
C -
I
NSTRUCTIONS AND
C
OMPUTER
The File Location
S
PECIFICATIONS
79
Advertisement
Table of Contents
Need help?
Do you have a question about the CathLabVR Simulator and is the answer not in the manual?