Cmos Data Clear; Power And Fan Connectors - Boser HS-7002 Manual

CN13: USB4/USB5 Connector
PIN Description PIN Description
1 VCC
3 BD5-
5 BD5+
7 GND
CN19: External USB Connector
PIN Description
1
3
5
7

3.16 CMOS Data Clear

The HS-7002 has a Clear CMOS jumper on JP3.
JP3: Clear CMOS
Optional
Normal Operation (default)
Clear CMOS
IMPORTANT: Before you turn on the power of your system, please
set JP3 to short 1-2 for normal operation.

3.17 Power and Fan Connectors

The HS-7002 provides one 4-pin and one 20-pin ATX power
connectors at CN1 and CN5.
The HS-7002 must use P4 power supply. One of 4-pin connectors is for
+12V lead which should be connected to CN1.
A 20-pin ATX Power Connector can be connected to Backplane or to
CN5. If a 20-pin ATX Power Connector connects to Backplane, please
make sure CN23 and Backplane's 5-pin ATX controller is connected
together!
20
2 VCC
4 BD4-
6 BD4+
8 GND
VCC
1
BD6-
BD6+
GND
Settings
Short 1-2
Short 2-3
2 8
1 7
4
1 3