Table of Contents
Advertisement
Analog Input SmartLead
6.6 Companion Software Installation
The Ultium sensors are compatible with several different software programs. Identify the
companion software that accompanies the equipment (MR3) and follow the appropriate
instructions given next.
6.6.1 MR3 Installation
1. Insert the MR3 feature map into the PC
2. A menu will automatically pop up
3. Click on "Install MR3" and follow the Wizard's instructions
4. Double click
6.7 Companion Software Configuration
Before the Ultium Analog Input SmartLead can be used with the Noraxon Ultium system, the
companion software must be configured to recognize the different components that make up the
system. Refer to the Ultium system's hardware manual for instructions for the program (MR3
myoMUSCLE) supplied with the Noraxon system. For specific settings for the Ultium Analog Input
SmartLead see below:
When assigned to a channel using the 'detect sensors in charger' feature (see below for
instructions), the software should automatically detect the sensor as a Ultium Analog Input
SmartLead.
P-811 Rev B (May 2019)
on the icon to start the MR3 software.
13
Advertisement
Table of Contents
