Removing The Fuel Tank; Replacing The Fuel Filter - Toro GrandStand TURBO FORCE 74513 Operator's Manual

Figure 46
1. Fuel cap

Removing the Fuel Tank

1. Lower the platform.
2. Release the cushion; refer to
Cushion for Rear Access (page
3. Remove the cross bracket.
Figure 47
1. Fuel tank
4. Remove the fuel tank and set it on the operator
platform.
Note:
If you want to move the fuel tank further
from the machine, remove the fuel and vent
lines from the top of the tank.
g031516
Releasing the
26).
g031413
2. Cross bracket

Replacing the Fuel Filter

Service Interval: Every 800 hours/Yearly (whichever
comes first)
Do not install a dirty filter if it is removed from the fuel
line.
Note:
Wipe up any spilled fuel.
1. Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Close the fuel-shutoff valve; refer to
Fuel-Shutoff Valve (page
4. Replace the fuel filter as shown in
35
Using the
22).
Figure
Figure 48
48.
g027518