Table of Contents
Advertisement
distance (twice the width of the machine) between
the machine and any hazard. Use a walk-behind
machine or a handheld tool to operate in these
areas.
•
Avoid starting, stopping, or turning the machine on
slopes. Avoid making sudden changes in speed or
direction; turn slowly and gradually.
•
Do not operate a machine under any conditions
where traction, steering or stability is in question.
Be aware that operating the machine on wet
grass, across slopes or downhill may cause the
machine to lose traction. Loss of traction to the
drive wheels may result in sliding and a loss of
braking and steering. The machine can slide even
if the drive wheels are stopped.
•
Remove or mark obstacles such as ditches, holes,
ruts, bumps, rocks, or other hidden hazards. Tall
grass can hide obstacles. Uneven terrain could
overturn the machine.
•
Use extra care while operating with accessories or
attachments. These can change the stability of
the machine and cause a loss of control. Follow
directions for counterweights.
•
If you lose control of the machine, step off and
away from the direction of travel of the machine.
Operating the Parking
Brake
Always engage the parking brake when you shut off
the machine or leave it unattended. Before each use,
check the parking brake for proper operation.
If the parking brake does not hold securely, adjust it;
refer to
Adjusting the Brakes (page
Pull the parking-brake lever rearward to engage it
(Figure
8).
Push the parking-brake lever forward to disengage it.
1. Parking brake—engaged
43).
Figure 8
2. Parking
brake—disengaged
Operating the
Mower-Blade-Control
Switch (PTO)
Use the blade-control switch (PTO) in conjunction with
the motion-control levers to engage and disengage
the mower blades.
Engaging the Mower Blades (PTO)
Disengaging the Mower Blades
(PTO)
Figure 10
and
Figure 11
the mower blades.
g009465
15
Figure 9
show 2 ways to disengage
Figure 10
Figure 11
g031592
g009174
g031593
Hide quick links:
Advertisement
Table of Contents
