Operating The Throttle; Operating The Ignition Switch; Starting The Engine - Toro GrandStand TURBO FORCE 74513 Operator's Manual

With 48in, 52in, or 60in cutting unit, serial no. 403224659/403260000/403253175/403254000 and up
Table of Contents

Advertisement

Operating the Throttle

You can move the throttle control between F
S
positions
(Figure
LOW
Always use the F
position when engaging the PTO.
AST
Figure 12
Operating the Ignition
Switch
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need to repeat the cycle for starting
the engine when you start it for the first time after you
have filled a completely empty fuel system with fuel.
Figure 13
Figure 14
AST
12).

Starting the Engine

and
Important:
Do not engage the starter for more
than 5 seconds at a time. If the engine fails to
start, wait 15 seconds between attempts. Failure
to follow these instructions can burn out the
starter motor.
Note:
You may need to repeat the cycle for starting
the engine when you start it for the first time after you
have filled a completely empty fuel system with fuel.
g008946
g031239
g031281
16
Figure 15
g031504

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents