Driving Forward Or Backward - Toro GrandStand TURBO FORCE 74513 Operator's Manual

Figure 17
1. Platform up
2. Platform down
Driving Forward or
Backward
The throttle control regulates the engine speed as
measured in rpm (revolutions per minute). Place
the throttle control in the F
performance.
Important:
Back the machine over curbs, 1 wheel
at a time; driving it forward over curbs could
damage the machine.
CAUTION
The machine can spin very rapidly, and you
may lose control of the machine, causing
personal injury to you and damage to the
machine.
Slow down the machine before making sharp
turns.
3. Pull the knob out to release
the platform.
position for best
AST
Driving Forward
1. Disengage the parking brake; refer to
the Parking Brake (page
2. Move the motion-control levers to the center,
unlocked position.
g031026
1. Front reference bar
2. Left control lever
3. Rear reference bar
3. Slowly push the motion-control levers forward
(Figure 19).
Note:
The engine shuts off if you move a
motion-control lever while the parking brake is
engaged.
Note:
The farther you move the motion-control
levers in either direction, the faster the machine
moves in that direction.
Note:
To stop, pull the motion-control levers
back to the N
18
15).
Figure 18
4. Right control lever
5. Right control lever in the
N -
EUTRAL LOCK
6. Left control lever in the
N -
EUTRAL LOCK
position.
EUTRAL
Operating
g030983
position
position